| After-sales Service: | Yes |
|---|---|
| Warranty: | 1year |
| Transport Package: | UPS/DHL/FedEx |
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
Non-Contact Phase Rotation Meter (Large Jaws). 24in (.7m) leads
Hioki's non-contact voltage detection and measurement technology places efficiency and safety as priority considerations with the goal of protecting customers that need to conduct on-site electrical work as part of renovations and expansions of manufacturing plants and buildings. Model PD3129-10 is a non-contact phase rotation meter that detects the phase of electrical current flow within insulated wires without using metallic contact voltage clips. The green arrow indicates normal phase, which can be useful for visual reports that document the proper completion of electrical work.
Phase detection by clipping onto live wires has always presented hazards to the field technician, often requiring other personnel to be on standby in case the traditional metal clips come into contact with exposed wires or conductors. The HIOKI Phase Detector PD3129-10 helps alleviate the extra costs and cuts labor hours by providing a safe way to detect phase sequence on distribution panels and motors by incorporating fully enclosed ABS-molded clips with absolutely no metal exposure. In the instrument, an electronic induction voltage sensor is employed to enable accurate phase detection of insulated conductors. This innovative technology has enabled HIOKI to provide CATIV600V/CATIII 1000V safety characteristics often required by large power utilities and similar potentially hazardous working environments.
The Hioki PD3129-10 is designed to safely detect the phase sequence in three-phase circuits for electrical installation and maintenance. Conventional metallic-contact phase detectors are constructed with a voltage cable with standard metallic clips, requiring the technician to clamp onto exposed metallic parts of the conductor and introducing the potential danger of electric shock accidents and short-circuit accidents caused by accidental contact between two metal points. Needless to say, ensuring safety in electrical work has been an increasingly important issue. A long-standing proponent of safety at the workplace, HIOKI released the 3129 Non-Metallic Contact Phase Detector in 2004 and achieved the goal of ensuring a safe working environment for our users. To enable more electricians to take advantage of our advanced technology, we have increased the range of vinyl-insulated wires that can be clipped with the non-metallic voltage clips to up to 500 mm2 in size, and extended the operating voltage range to 1000V AC. With the all-new Phase Detector PD3129-10, safe phase sequence testing can now be conducted in even more environments where the previous non-metallic-contact phase detectors could never be safely applied.
| PD3129-10 for Thick Conductors | PD3129 for Thin Conductors | |
| Functions | Phase detection (positive and negative) | |
| Voltage Detection Method |
Electrostatic induction method | |
| Clamp Diameter (insulated wiring) |
10 to 40mm | 2.4 to 17mm |
| Voltage Range | 3-phase 70 to 1000V AC (continuous sine wave) |
3-phase 70 to 600V AC (continuous sine wave) |
| Frequency Range | 45Hz to 66Hz | |
| Safety | CATIII 1000V, CAT IV 600V (Anticipated Transient Overvoltage of 8000V) |
CAT III 600V (Anticipated Transient Overvoltage of 6000V) |
| Phase Indication | Positive: 4 LEDs lit in clockwise order and 3 short beeps Negative: 4 LEDs lit in counterclockwise order and one continuous beep |
|
| Battery Check Function |
Ready: ON lamp lights / Battery low: ON lamp blinks | |
| Power Supply | Two "AA" (R6P) size batteries; rated voltage: 3.0V DC; maximum rated power: 300mVA; continuous use: approx. 70 hours (standby) |
|
| Dimensions | 70W x 75H x 30D mm (2.76"W x 2.95"H x 1.18"D); Cord length: 0.7m (25.76") | |
| Mass (incl. batteries) | 240g (8.5 oz) | 200g (7.1 oz) |
| Usage Environment | Indoors, altitude up to 2000m Operating temperature: 0 to 40°C (32 to 104°F), max. 80% rh (no condensation) Storage Temperature: -20 to 60°C (-4 to 140°F), max. 80% rh (no condensation) |
|
Test Equipment General Attributes |
|
|---|---|
| Unique Features | Non Contact clamps measure current without wire stripping, 40mm jaw |
| Warranty | 1 YEARS |
| Product Weight | 240 GRAMS (0.529 LBS) |
| Product Height | 30 IN |
| Product Length | 75 IN |
| Product Width | 70 IN |
| Data Logging | No |
| HTS/Schedule B Number | 9030.33.3400 |
| ECCN Number | 3A992 |
| Country of Origin | Japan |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}