| After-sales Service: | Yes |
|---|---|
| Warranty: | 1year |
| Application: | Motor Rotation Tester |
| Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier
PHASE SEQUENCE AND MOTOR ROTATION TESTER
If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the motor and the equipment it is powering.
The PRM-6 Motor and Phase Rotation Tester can test the motor rotation of 3-phase systems, and verify 3-phase receptacle wiring and phase sequencing with test leads.
An additional advanced feature is wireless motor rotation detection, which senses motor rotation direction without use of test leads. This is particularly useful for fast-running motors when the motor rotation cannot be visually determined or when the drive shaft is not visible.
Durably constructed with a rubber outer casing, the PRM-6 has a bright, backlight LCD display, CAT IV 600 V rating, and conforms to EN 61010 and EN 61557 standards, making it an essential tool for motor rotation and phase sequence testing in commercial and industrial environments on electrical systems up to 700 V.
Indicates the phase rotation in 3-phase systems for both power sources and motors.
Identifies faulty 3-phase wiring with de-energized phases or incorrectly wired receptacles.
Indicates motor rotation in disconnected motors using test leads and by spinning the shaft by hand or other means.
Tests for rotation direction on a running motor with the built-in non- contact, wireless sensor - specifically important for fast running motors or motors where the shaft is not visible.
| General Specifications | |
| Operating temperature | 0°C to 40°C (32°F to 104°C) |
| Operating altitude | Up to 2000 m |
| Power | AAA battery (2) |
| 3 phase indication | LCD |
| Dimensions (H x W x D) | 5.43 in x 2.56 in x 1.3 in (13.7 cm x 6.5 cm x 3.3 cm) |
| Weight | .38 lb (.17 kg) including battery |
| Dust/water resistance | IP 40 |
| Pollution degree | 2 |
| Overvoltage category | CAT IV 600 V |
| Agency approvals | CE cCSAus |
| Safety | Conforms to EN 61010-1 EN 61010-031 EN 61557-1 EN 61557-7 |
| EMC | Conforms to EN 61326-1 |
| Electrical Specifications | |
| Rotary field detection | |
| Voltage range (frequency) | 40 - 700 V (16 - 60 Hz) 50 - 700 V (60 - 400 Hz) |
| Nominal test current | < 3.5 mA |
| Non-contract rotary field indication | |
| Frequency range | 16 - 400 Hz |
| Motor connection (with leads) | |
| Voltage range | ≥ 1 - 700 V |
| Frequency range | 2 - 400 Hz |
| Nominal test current | < 3.5 mA |
Test Equipment General Attributes |
|
|---|---|
| Product Height | 2.30 IN |
| Product Length | 9.20 IN |
| Product Width | 5.80 IN |
| HTS/Schedule B Number | 9030.39.0100 |
| ECCN Number | EAR99 |
| Country of Origin | China |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}