Fluke 710 Ma Loop Valve Tester

• After-sales Service: Yes
• Warranty: 1year
• Transport Package: UPS/DHL/FedEx
• Specification: 15 cm x 9 cm x 3 cm
• Trademark: FLUKE
• Origin: China
• Model NO.: Fluke 710
• HS Code: 9027100090
• Production Capacity: 50, 000 Pieces/Year

Product Description

Product Parameters

 

Fluke 710 Valve Testing Loop Calibrator with HART Communications/Diagnostics

• FLUKE-710 mA Loop, Valve Tester, w/HART
• Does everything included in models 709 and 709H plus valve test features
• Valve test procedures that deliver Good, Marginal or Bad assessment of a control valve
• Generic HART communication
• Best-in-class mA accuracy at 0.01 % measurement or source value
• Compact rugged design
• Intuitive user interface with Quick-Set knob for fast setup, easy to use
• 24 V DC loop power with mA measure mode (-25 % to 125 %)
• Resolution of 1 μA on mA ranges and 1 mV on voltages ranges
• Built in selectable 250 Ω resistor for HART communications
• Simple two wire connection for all measurements

 

Description

Fluke 710 - mA Loop Valve Tester

 

• Valve test procedures that deliver Good, Marginal or Bad assessment of a control valve
• Generic HART communication
• Best-in-class mA accuracy at 0.01 % measurement or source value
• Compact rugged design
• Intuitive user interface with Quick-Set knob for fast setup, easy to use
• Does everything included in models 709 and 709H plus valve test features

The Fluke 710 Valve Testing Loop Calibrator is designed to enable users to perform quick, easy tests on HART smart control valves. Featuring built-in test procedures and an intuitive user interface, the 710 allows users to quickly and easily perform valve tests, while the valve test quick-check results provide at-a-glance diagnostics help you make maintenance decisions faster than ever. The valve health quick-check results let you know whether your valve is in good, marginal, or in a bad operating condition so you can quickly decide whether additional maintenance is necessary.

Valve Testing and HART Communication in a Precision Loop Calibrator

With the 710 Valve Testing Loop Calibrator's built in HART communication function, users can source a 4-20 mA signal to cause the smart control valve to move, while simultaneously interpreting the valve's HART feedback signal to determine whether the valve is moving to the expected position. In addition to positional information, the measured pressure delivered from the valve's internal I/P (which moves the valve) can be determined through the HART communication protocol.

The 710 has built-in test procedures that automatically increase and change the mA signal while monitoring the HART position and pressure feedback from the control valve, giving you a better overall picture of valve health at the simple push of a button.

Pre-configured Valve Tests, at-a-glance Answers

Valve test routines built into the 710 include:

• Manual testing; manually change the mA signal and view the HART position and pressure variable information
• Full range ramping of the mA signal from 4 to 20 to 4 mA while recording the 0-100-0% position, or the pressures applied that move the valve from 0-100-0%
• Stepping the mA signal on the input to the valve in steps and evaluating the valves response to the mA input changes
• Speed tests to determine how fast the valve can open or close
• Bump and partial stroke tests that help test valves over a portion of their range so they can be tested in a live process

Performance Test Comparison in Fluke ValveTrack Software

 

ValveTrack Software Enables Further Analysis and Trending

Valve tests that are logged and recorded to memory in the 710 are available to upload to included ValveTrack analysis software.

ValveTrack software enables you to:

• Upload, print and plot logged valve tests taken in the field
• Compare previous uploaded tests to recent tests
• View valve test history by HART Tag ID
• Export valve test data to CSV for additional analysis in Microsoft Excel

 

Saving Time, Getting Answers

In addition, the 710 offers:

• Logging of HART data in the field. Once recorded by the 710 in the field, the ValveTrack™ software can upload the HART configuration of up to (20) HART devices in your plant and output data in either (.csv) or (.txt) format.
• Data logged mA loop measurements and HART data can be recorded from a particular transmitter for troubleshooting and loop tuning. The data log feature offers selectable capture with recording intervals of 1 to 60 seconds and a logging capacity of 9800 records or 99 individual sessions. Each record contains the mA measurement and all four process variables.

HART Communication

The Fluke 710 offers a built-in HART modem to communicate the following HART commands:

• Read sensor PV information
• Read PV output information
• Read and write PV unit type, tag ID name, descriptor, and message
• Read and write PV ranges (upper and lower)
• Enter/exit fixed current mode
• Set zero offset
• Trim DAC zero (mA output 4 mA)
• Trim DAC gain (mA output 20 mA)

HART Commands for Valves

The 710 includes these unique HART commands to support control valves:

• Autotrim of valve controller

In addition, the Fluke 710 offers:

• Logging of HART data in the field. Once recorded by the 710 in the field, the ValveTrack™ software can upload the HART configuration of up to 20 HART devices in your plant and output data in either .csv or .txt format
• Data-logged mA loop measurements and HART data can be recorded from a particular transmitter for troubleshooting and loop tuning. The data log feature offers selectable capture with recording intervals of 1 to 6 seconds and a logging capacity of 9800 records or 99 individual sessions. Each record contains the mA measurement and all four process variables.

In The Box

• Fluke 710 mA Loop Valve Tester 
• Stackable test lead set 
• Extended tooth alligator clip set 
• TP220 test probes 
• AC280 SureGrip™ hook clips 
• Lemo to USB upload/download cable 
• ValveTrack™ software (link to free download) 
• Soft case 
• Six AAA batteries (installed) 
• 709/709H/710 Quick reference guide 
• 709/709H/710 Safety information 

Manuals/Guides

Spec Sheets

• Fluke 710 mA Loop Valve Tester Data Sheet

Application Notes

• Fluke 710 Key Differences compared to loop calibrators and field communicators

Manufacturer Specs

General Specifications
Functions	mA source, mA simulate, mA read, mA read/loop power, and volts read.
Ranges	mA (0 to 24 mA) and Volts (0 to 30 V dc)
Resolution	1uA on mA ranges and 1mV on voltage range
Accuracy	0.01 % ± 2 counts all ranges (@ 23 °C ± 5 °C [73.4 °F ± 41 °F])
Operating temperature range	-10 °C to 55 °C (14 °F to 131 °F)
Humidity range	10 to 95 % non-condensing
Stability	20 ppm of F.S./°C from -10 °C to 18 °C and 28 °C to 55 °C
Display	128 x 64 pixels, LCD graphic w/backlight, .34 in high digits
Power	6 AAA alkaline
Battery Life	≥ 40 hours continuous use (measure mode using alkaline)
Loop Compliance Voltage	24 V dc @ 20 mA
Voltage Protection	240 V ac
Overload Current Protection	28 mA dc
EMC	EN61326 Annex A (portable instruments)
Dimensions (L x W x D)	15 cm x 9 cm x 3 cm (6 in x 3.6 in x 1.3 in)
Weight	0.3 kg (9.5 ounces)
Warranty	Three year

Tech Specs

Test Equipment General Attributes
Product Height	7.84 IN
Product Length	3.63 IN
Product Width	10.13 IN
HTS/Schedule B Number	9030.31.0000
Country of Origin	China
Shipping Height	7.84 IN
Shipping Length	3.63 IN
Shipping Width	10.13 IN

Packaging & Shipping

 

 

As an important international instrument sales platform, our company has the authorization qualifications of many international first-line brands. Relying on the advanced digital information management platform and international procurement platform, we provide more than 100,000 instruments, industrial MRO products, industrial products and spare parts to global customers. Our business scope: industrial testing, non-destructive testing, gas testing, electrical testing, laboratory testing, water quality testing, environmental testing, medical testing...                   So far, we have become an important partner of many global top 500 companies and well-known local Chinese companies. Create an efficient supply chain system to provide customers with strong supply guarantee.