SKF Phlfm10 Belt Frequency Meter 10 to 400Hz Quickly Measures Belt Progress and Vibration Frequency

• After-sales Service: Yes
• Warranty: 1year
• Model Number: Phl FM 10/400
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: SKF PHLFM 10/400
• Frequency Range: 10 to 400 Hz
• Protection Class: IP54
• Transport Package: UPS/DHL/FedEx
• Trademark: SKF
• Origin: Netherlands
• HS Code: 9030401000
• Production Capacity: 50, 000 Pieces/Year
• Package Size: 40.00cm * 35.00cm * 20.00cm
• Package Gross Weight: 3.000kg
• Lead Time: 5 days (1 - 100 Pieces) ; To be negotiated ( > 100 Pieces)

Product Description

Product Parameters

 

SKF PHL FM 10/400 - Belt Frequency Meter, 10 to 400 Hz

Easy and quick to use:

 

* Simply key-in the span length and mass data. Data can also be saved and recalled for repeated use, if necessary.
* Aim sensor at center of selected belt span and pluck or tap the belt.
* The display will show the measured frequency which can be toggled to either newton or pound force values.
* Readjust the belt tension, if necessary, and take another measurement.

The SKF Belt Frequency Meter is a two component system consisting of a hand-held meter attached to an optical sensor via an electronic cable. The sensor uses an infrared beam to detect the vibration of a belt strand and sends a signal to the meter. (The sensor includes an LED that produces an orange light beam to help aim the invisible infrared ray.) Comparing this input to the vibration of a quartz crystal, the meter computes the natural frequency of the belt. The result is shown in the display window as hertz (oscillations per second). The internal programming of the meter is also able to report the belt tension in units of force (either newton or pounds-force) provided the operator has entered the belt mass and span length using the manually operated key pad.

* Easy to use; no training required
* Detection of vibration/frequency and tension of a belt through an optical sensor (infrared)
* Orange LED generated beam supports aiming of the sensor
* Measurement system based upon very stable quartz crystal

* Capable frequencies range: 10 Hz to 400 Hz
* Precision mechanical resonator (tuning fork) included to check calibration at a spot frequency
* Visable and audible communication with the operator
* Lightweight, handheld device

 

SKF PHL FM 10/400 - Belt Frequency Meter, 10 to 400 Hz

Easy and quick to use:

 

* Simply key-in the span length and mass data. Data can also be saved and recalled for repeated use, if necessary.
* Aim sensor at center of selected belt span and pluck or tap the belt.
* The display will show the measured frequency which can be toggled to either newton or pound force values.
* Readjust the belt tension, if necessary, and take another measurement.

The most accurate belt tension measurement method

 

Correct belt tension is crucial for the whole drive system, its service life and the service life of associated components such as bearings and seals. Therefore, it is important to get accurate and reliable results when measuring belt tension.

 

The SKF Belt Frequency Meter is one of the most accurate tools available for measuring belt tension. Readings are quick, reliable and, most importantly, repeatable. The tool is extremely easy to use and minimizes the risk of errors.

Specification

Designation		PHL FM10/400
Measurement range	Frequency range	10 to 400 Hz
	Measurement accuracy	Below 100 Hz ± 1 significant digit
		Above 100 Hz ± 1%
	Belt mass input range	0,001 to 9,990 kg/m
	Belt span input range	0,001 to 9,99 m
	Maximum belt tension display	9 990 N / 2 200 lb
Environmental conditions	Operating temperature	+10 to +50 °C
	Shipment and storage temp	−50 to +70 °C
	Protection class	IP54
Sensor	Type	Infrared optical
	IR wavelength	970 nm
	Visible aiming beam	Narrow angle orange LED
	Housing	Machined aluminium
	Cable length	1 m
Power supply	Battery type	AA (MN1500) Alkaline only
	Number	4
	Expected life	20 hrs
	Compartment location	Back of meter
Optional rechargeable batteries	Battery type	AA (1 300 mAh minimum)
	Charger	12 to 15 V DC output
	Socket/polarity	3,5 mm positive centre

Packaging & Shipping

As an important international instrument sales platform, our company has the authorization qualifications of many international first-line brands. Relying on the advanced digital information management platform and international procurement platform, we provide more than 100,000 instruments, industrial MRO products, industrial products and spare parts to global customers. Our business scope: industrial testing, non-destructive testing, gas testing, electrical testing, laboratory testing, water quality testing, environmental testing, medical testing...    

So far, we have become an important partner of many global top 500 companies and well-known local Chinese companies. Create an efficient supply chain system to provide customers with strong supply guarantee.