| After-sales Service: | Yes |
|---|---|
| Warranty: | 1year |
| Display: | Digital |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Digital Low Resistance Ohmmeter - 10A including memory/download- With DH4-C Duplex handspike set (1006-444), one with indicator lights. 1.5m ~ 5 ft.
The Megger DLRO-10X brings new standards to low resistance measurement. It's fully automatic instruments, selecting the most suitable test current, up to 10 A dc to measure resistance from 0.1 µΩ to 2000 Ω on one of seven ranges. For users who desire more control over the measurement process, DLRO 10X uses a menu system controlled by a two-axis paddle to allow manual selection of the test current. It's also adds real-time download of results and on-board storage for later download to a PC.
The Megger DLRO-10X Ducter Digital Low Resistance Ohmmeter is built into a strong, lightweight case that is equally at home in the field or in the laboratory. Light enough to be worn around the neck, they are small enough to be taken into areas which were previously too small to access. DLRO 10X has a large, backlit LCD display. Normally, measurements are made with forward and reverse currents to cancel the effects of any standing voltages across the test sample.
The average value is then displayed within 3 seconds, to a basic accuracy of 0.2%. DLRO 10X displays both forward and reverse measurements as well as the average of the two.
The DLRO 10X allows the user to set high and low pass limits, thereby enabling simple go-no-go testing.
At the end of a test Megger DLRO-10 Ducter Digital Low Resistance Ohmmeter will store the test results, as well as any notes relevant to the test.
The instrument is supplied as standard with a Nickel Metal Hydride (NiMH) battery pack. The battery packs are inter- changeable so that an exhausted battery may be recharged using the external charger supplied while testing continues using a spare pack. Although full charging will take 4 hours, a fast charge mode allows the battery to be 90% charged within 2 1/2 hours from a 12 volt battery or from a standard 120/230 V AC supply via the supplied charger. The battery pack contains its own battery state indicator, which allows the charge-state to be monitored, even without being connected to the instrument.
To assist operator safety and ease of use, both instruments are supplied complete with a pair of duplex handspikes with 1.2 m (4 ft) leads. One of the probes is fitted with LED's, which duplicate indicators on the instrument display indicating that all four contacts have been made, the presence of a high voltage across the load, and the presence of current flow while a load is discharging. A full range of test leads is available with probes, clamps and Kelvin clips.
Megger DLRO-10 Ducter Digital Low Resistance Ohmmeter is fitted with RS232 communications that will allow results to be downloaded in real time or stored for later retrieval.
Up to 700 sets of results may be stored within DLRO 10X complete with notes containing up to 200 characters which may be added using the on board keypad. These results can also be downloaded to a PC.
| Cat. #: | DLRO10X |
| Resistance Range: | 0 - 1.999 M-ohm 0 - 19.99 M-ohm 0 - 199.9 M-ohm 0 - 1.9999 ohm 0 - 19.99 ohm 0 - 199.99 ohm 0 - 1999.9 ohm |
| Resolution: | 0.1 µ-ohm 1 µ-ohm 10 µ-ohm 100 µ-ohm 1 M-ohm 10 M-ohm 100 M-ohm |
| Current: | 100 A 10 A 1 A 100 mA 10 mA 1 mA |
| Accuracy: | 0.2% + 2 lsd |
| Power Source: | Rechargeable batteries |
| Dimensions: | 220mm (H) x 100mm (W) x 237mm (D) (8.4 x 4 x 9.5 inches) |
| Weight: | 2.6 kg (5 3/4 lb) approximately |
Micro / Milli / Meg Ohmmeters/Micro-Ohmmeter / DLRO / Bond Testing Template |
|
|---|---|
| Style (Micro-Ohmmeter) | Portable |
| Maximum Test Current | 10 A |
| Variable Test Current | Yes |
| Min Resistance | 0.1 u Ohms (0.00010 m Ohms) |
| Max Resistance (ohm) | 1999.9 Ohms |
| Alarm | No |
| Temperature Compensation | No |
| Line Power or Battery power | Battery Power, Line Power |
| Kelvin Four-Terminal Measurement | Yes |
Test Equipment General Attributes |
|
| Unique Features | Modes: Manual, Auto, Continuous, High Power, Unidirectional. Stores up to 700 tests. Integrated alphanumeric keypad. Backlit LCD display, battery or optional power module for 120 V AC |
| Warranty | 2 YEARS |
| Safety Approval | CE |
| Interfaces I/O | RS-232 |
| Product Weight | 6 LBS |
| Product Height | 9.5 IN |
| Product Length | 8.5 IN |
| Product Width | 4 IN |
| Data Logging | Yes |
| HTS/Schedule B Number | 9030.39.0100 |
| ECCN Number | EAR99 |
| Calibration Included | None |
| Battery Type | NimH |
| Power Supply Voltage | 120V/220V Universal, Battery Powered |
| Country of Origin | United Kingdom |
){kind=link}