| After-sales Service: | Yes |
|---|---|
| Warranty: | 1year |
| Test Mode: | Instant Test |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Fluke Networks MT-8200-60-KIT IntelliTone Pro 200 Lan Toner and Probe Kit, SmartTone Analog Toning
IntelliTone™ Pro is the first toner and probe to offer digital and analog toning all in one tool. That means it's equipped with the most powerful cable location and verification technologies for any work environment - even active networks.
Cabling installations have become increasingly complex, which has made cabling increasingly difficult to locate with traditional technologies.
When cables are run together for even short lengths, a signal from one can bleed over to another. One cable might carry the original signal; other cables might carry the signal as a result of bleed. Isolating cables with traditional tools requires guesswork, training, time for repeated testing - and even the best efforts often result in mistakes.
IntelliTone Pro provides two cutting-edge technologies to isolate cables or wire pairs. Digital mode can be used to isolate twisted-pair cables on a switch or within a bundle. SmartTone™ analog mode can be used to isolate wire pairs at an unterminated outlet.
Overcome noise - and save hours of time
Fluorescent lights, machinery, computer monitors and electrical wiring all produce noise that slows down cable location. Together, the IntelliTone Pro Toner's synchronized digital signal and the IntelliTone Pro Probe's microprocessor controlled signal identification technology reject noise and false signals to clearly identify cable location. This can save you hours every week on cable location projects.
Tone on live networks safely and effectively
Modern network devices use common mode termination for cables connected to their ports. This reduces noise and crosstalk in the cable; but, it can also absorb a traditional toner signal. Unlike traditional signals, the IntelliTone digital signal stays strong despite common mode termination. And the IntelliTone Pro 200 LAN Toner automates toning individual cable conductors, making it quick, efficient and safe to locate cables on active networks.
Verify conductor continuity with cablemap
Eliminate callbacks during cabling moves, adds and changes with the powerful diagnostic capabilities of IntelliTone™ Pro 200 LAN. The IntelliTone Pro 200 Probe features a Cablemap capability that identifies common cable miswires in twisted pair cabling. IntelliTone technology automates the testing of each conductor for end-to-end continuity; LED lights and tones clearly indicate miswires.
Identify and troubleshoot cable services
Service - Is the RJ45 jack a datacom jack, or a dead jack? IntelliTone Pro 200 LAN Toner LEDs clearly identify common datacom services found on today's networks including 10/100/Gigabit Ethernet links.
Continuity - Once you've located a cable, the next step is to verify cable conductor continuity. IntelliTone Pro 200 LAN Toners make it easy - eliminating the need for a separate diagnostic tool.
| Pro 3000 | Intellitone Pro | MicroMapper | TS100 PRO | MS2-100 | CIQ-100 | |
| Port Location ID | ||||||
| Digital Toning | ||||||
| Analog Toning | ||||||
| Switch Presence | ||||||
| VDV Service Detection | ||||||
| Cable Verification | ||||||
| Cable Wiremap | Graphical | Graphical | ||||
| Cable Length | ||||||
| Qualified Cabling Speed (10/100/1000/VoIP) | ||||||
| Cable Troubleshooting | ||||||
| Indentify open/short | ||||||
| Distance to open/short | ||||||
| Locate crosstalk fault | ||||||
| Identify and locate impedance fault | ||||||
| General | |
| Operating temperature | 32 °F to 104 °F (0 °C to 40 °C) |
| Storage temperature | -4 °F to +140 °F (-20 °C to +60 °C) |
| Operating relative humidity (% RH without condensation) |
95% (50 °F to 95 °F; 10 °C to 35 °C) 75% (95 °F to 104 °F; 35 °C to 40 °C) Uncontrolled < 50 °F (< 10 °C) |
| Vibration | Random, 2 g, 5 Hz - 500 Hz |
| Shock | 1 m drop test with and without module |
| Safety | IEC 61010 Category: None |
| Altitude | 3000 m |
| EMC | EN 61326-1 |
| Battery type and life | 9 V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical |
| Applications | Copper cabling media, including shielded (STP) and UTP cable; 75 or 50 Ohm coaxial cable; two conductor control, security, generic cabling. 10 Base-T or 10/100/1000 Base-T datacom networks. |
| Toner | ||
| Dimensions | 5.54 in x 2.94 in x 1.25 in (14.1 cm x 7.5 cm x 3.2 cm) |
|
| Display | LED | |
| Control | Thumbwheel switch | |
| Toner interface | Main Mod8 port for tone generation on all 4 pairs of UTP / STP cabling, F connector for coaxial cabling, Banana jack plugs (2) - two conductor wiring | |
| Toner frequency | IntelliTone™ signal: encoded digital signal Analog SmartTone signal: 500-1200Hz, 4 Songs | |
| Output power | 5 V p-p | |
| Auto power down | Turns off automatically after 2.5 hours of inactivity | |
| Probe | ||
| Dimensions | 8.73 in x 1.88 in x 1.26 in (22.2 cm x 4.8 cm x 3.2 cm) |
|
| Display | (8) LED indicators, Synch LED indicator | |
| Audio | IntelliTone: Microprocessor controlled audio files, Analog: Detected toner signal | |
| Control | Thumbwheel switch, volume control wheel | |
| Tone detection | Detects IntelliTone™ digital signal for Locate, Isolate and CableMap Detects Analog SmartTone Signal (500-1200Hz) and other analog toners. |
|
| Toner interface | Main Mod8 port for cablemap on all four pairs of UTP / STP cabling | |
| Auto power down | Turns off automatically after one hour of inactivity | |
Test Equipment General Attributes |
|
|---|---|
| Product Height | 4.30 IN |
| Product Length | 11.80 IN |
| Product Width | 6.30 IN |
| Shipping Weight | 1.2 LBS |
| HTS/Schedule B Number | 9030.33.3400 |
| ECCN Number | EAR99 |
| Country of Origin | Malaysia |
| Shipping Height | 4.30 IN |
| Shipping Length | 11.80 IN |
| Shipping Width | 6.30 IN |
){kind=link}