Amprobe at-6010 Advanced Wire Tracer Kit, 0 to 600 V AC/DC

• After-sales Service: Yes
• Warranty: 1year
• Certification: CE, ISO
• Model NO.: Amprobe AT-6010
• Customized: Non-Customized
• Application: Examination Room, Public Area, Factory
• Alarm Form: Sound and Light Alarm
• Transport Package: UPS/DHL/FedEx
• Specification: 9.45 IN*13.00 IN*9.45 IN
• Trademark: Amprobe
• Origin: China
• HS Code: 8526919090
• Production Capacity: 50, 000 Pieces/Year

Product Description

Product Parameters

 

• Large LCD Receiver screen with two digit readout, bar graph and sound to easily determine wire location
• Simple one button Transmitter operation
• Compatible with the CT-400 Signal Clamp accessory for inducing a tracing signal on the cable when there is no access to bare

 

With the AT-6010 Advanced Wire Tracer, it's never been easier and safer to locate Energized and De-energized wires, breakers and fuses. When the Transmitter is connected to the circuit, the Receiver easily detects the signal in the wires or cables behind walls, ceilings and floors.

The Transmitter works on Energized and De-energized circuits up to 600 V AC/DC in Category I through Category III electrical environments, allowing for work directly on an energized circuit without the need to take equipment offline. The Transmitter also features high signal mode for general tracing and a loop mode designed specifically for locating shorts, as well as two optimal tracing frequencies that are automatically activated based on the detected voltage.

The complete AT-6010 kit features test leads and accessories International accessory kit for use outside North America.

• Intuitive Transmitter automatically senses whether the system is energized or de-energized
• Most accurate wire tracing in its class with eight sensitivity modes
• Reliable, precise breaker identification
• Tested by Fluke and safety certified by 3rd party labs

• Manufacturer Specs

  AT6000 Series Specifications
  Features	AT-6010-R Receiver	AT-6010-T Transmitter	CT-400 Signal Clamp
  Measurement category	CAT III 600 V	CAT III 600 V	CAT IV 600 V, CAT III 1000 V
  Operating voltage	0 to 600 V AC/DC	0 to 600 V AC/DC	0 to 1000 V AC
  Operating frequency	Energized: 6.25 kHz, De-Energized: 32.768 kHz	Energized: 6.25 kHz, De-Energized: 32.768 kHz	AC current measurement: 45 Hz to 400 Hz
  Hazardous voltage detection	-	> 30 V AC/DC	-
  Signal indications	Numeric, bar graph display and audible beep	LEDs	-
  Response time	Tip Sensor (Energized/De-energized): 500 ms Battery voltage monitoring: 5 sec	Line voltage monitoring: 1 sec Battery voltage monitoring: 5 sec	Instantaneous
  Current output of signal (typical)	-	Energized circuit: HI mode: 60 mA RMS De-energized circuit: HI mode: 130 mA RMS Loop mode: 160 mA RMS	1 mA/A for AC current measurement with multimeter
  Signal voltage output (nominal)	-	De-energized circuit: HIGH: 33V RMS, 140 Vp-p With CT-400: loop mode: 31 V RMS, 120 Vp-p	De-energized circuit: 2.4 V RMS, 24 Vp-p
  Range detection (open air	Tip sensor (Energized): Max distance via air: up to 20 ft (6.1 m) Pinpointing: approx. 1.97 in (5 cm) Tip sensor (De-energized): Max distance via air: up to 14.7 ft (4.5 m) Pinpointing: approx. 1.97 in (5 cm	-	-
  General Specifications
  Display size	LCD 2.5 in (6.35 cm)	-	-
  Display dimensions (W x H)	1.45 x 1.93 in (36.72 x 48.96 mm)	-	-
  Display type	Segment LCD	LEDs	-
  Display color	Black and white	Operating mode LEDs: red, Battery status LEDs: red	-
  Booting time	< 3 sec	< 2 sec	-
  Backlight	•	-	-
  Operating temperature	4 °F to 122 °F (-20 °C to 50 °C)		32 °F to 122 °F (0 °C to 50 °C)
  Operating humidity	45%: -4 °F to <50 °F (-20 °C to <10 °C), 95%: 50 °F to <86 °F (10 °C to <30 °C) 75%: 86 °F to <104 °F (30 °C to <40 °C), 45%: 104 °F to 122 °F (40 °C to 50 °C)		95%: 50 °F to <86 °F (10 °C to <30 °C) 75%: 86 °F to <104 °F (30 °C to <40 °C) 45%: 104 °F to <122 °F (40 °C to <50 °C)
  Storage temperature and humidity	-4 °F to 158 °F (-20 °C to 70 °C), <95% RH		-4 °F to 158 °F (-20 °C to 70 °C), <95% RH
  Operating altitude	0 to 6561 ft (2000 m)		0 to 6561 ft (2000 m)
  Transient protection	-	6.00 kV (1.2/50μS surge)	-
  Pollution degree	2	2	2
  IP rating	IP 52	IP 40	IP 40
  Drop test	3.28 ft (1 m)	3.28 ft (1 m)	3.28 ft (1 m)
  Power supply	4 x AA (alkaline)	8 x AA (alkaline)	-
  Power consumption (typical)	70 mA	Hi mode: 70 mA Loop mode with Clamp: 90 mA Consumption without signal transmission: 10 mA	-
  Battery life	Approx. 25 h	Hi mode: approx. 25 h Loop mode: approx. 18 h	-
  Low battery indication	•	•	-
  Fuse	-	-	1.26 in (32 mm)
  Dimensions (L x W x H)	Approx. 7.2 x 2.95 x 1.69 in (183 x 75 x 43 mm)	Approx. 7.2 x 3.66 x 1.97 in (183 x 93 x 50 mm)	Approx. 5.9 x 2.75 x 1.18 in (150 x 70 x 30 mm)
  Weight	Approx. 0.6 lb (0.27 kg)	Approx. 1.25 lb (0.57 kg)	Approx. 0.25 lb (0.114 kg)

  Tech Specs

  Wire Tracers / Circuit Breaker Tracers/Wire Tracers / Circuit Breaker Tracers Template
  Tests	Shorts
  Energized Circuits	Yes
  De-energized Circuits	Yes
  Maximum Circuit Distance	20 Ft
  Underground/Hidden Cable Capability	Yes
  Type of Alarm	Audible, Visual
  Tone Generator	Yes
  Clamp-on Attachment	No
  Identifies Breakers	Yes
  Distance to Wire	No
  Test Equipment General Attributes
  Warranty	1 YEARS
  Safety Approval	CSA, UL
  Product Weight	2.1 LBS
  Product Height	9.45 IN
  Product Length	13.00 IN
  Product Width	9.45 IN
  Data Logging	No
  ECCN Number	3A992
  Battery Type	AA
  Country of Origin	China

 

Packaging & Shipping

 

 

As an important international instrument sales platform, our company has the authorization qualifications of many international first-line brands. Relying on the advanced digital information management platform and international procurement platform, we provide more than 100,000 instruments, industrial MRO products, industrial products and spare parts to global customers. Our business scope: industrial testing, non-destructive testing, gas testing, electrical testing, laboratory testing, water quality testing, environmental testing, medical testing...    

So far, we have become an important partner of many global top 500 companies and well-known local Chinese companies. Create an efficient supply chain system to provide customers with strong supply guarantee.