The SKF TKBA 10 allow pulleys and sprockets to be aligned on the side face. The unit magnetically attaches to the inside or outside face of almost any belt pulley or chain sprocket and has no small parts or targets that can get lost. A laser line is projected from the transmitter unit to the reflector unit mounted on the opposite pulley. A reference line on the reflector unit directly indicates the offset and vertical angle misalignment. The reflected laser line shown on the transmitter unit shows the horizontal angle misalignment of all three.
SKF TKBA 10 - Red Laser Diode, Belt Alignment Tool
- Utilises Red Laser
- Used for distances upto 3m
- Powerful magnets allow fast and easy attachment
- Facilitates simultaneous adjustment of tension and alignment
- Can be used on almost all machines using V belts, banded belts, ribbed belts and most other belts as well as chain sprockets
Red laser diode, Belt Alignment Tool
- Powerful magnets allow fast and easy attachment
- Facilitates simultaneous adjustment of tension and alignment
- Can be used on almost all machines using V belts, banded belts, ribbed belts and most other belts as well as chain sprockets
- SKF TKBA 10 utilizes a red laser and can be used for distances up to 3 m (10 ft)
- SKF TKBA 20 utilizes a highly visible green laser and can be used for distances up to 6 m (20 ft). It can even be used outdoors in sunny conditions
- Sturdy aluminium housings help ensure assembly stability and accuracy during the alignment process
Product Parameters
Type of laser |
Red laser diode |
Laser |
1x Built-in class 2 laser, <1 mW, 635 nm |
Laser line length |
2 m at 2 m (6.6 ft at 6.6 ft) |
Measurement accuracy angular |
Better than 0,02° at 2 m (6.6 ft) |
Measurement accuracy offset |
Better than 0,5 mm (0.02 in.) |
Measurement distance |
50 mm to 3 000 mm (2 in. to 10 ft) |
Control |
Laser on/off rocker switch |
Housing material |
Aluminum, powder coat finish |
Dimensions |
Transmitter unit |
169 x 51 x 37 mm (6.65 x 2.0 x 1.5 in.) |
Receiver unit |
169 x 51 x 37 mm (6.5 x 2.0 x 1.5 in.) |
Reflector dimensions |
22 x 32 mm (0.9 x 1.3 in.) |
|
|
Packaging & Shipping