Fluke T6-1000 - Electrical Tester with Fieldsense

• After-sales Service: Yes
• Warranty: 1 Year
• Transport Package: UPS/DHL/FedEx
• Specification: 61.1 mm x 259.3 mm x 43.8 mm
• Trademark: FLUKE
• Origin: USA
• Model NO.: Fluke T6-1000
• HS Code: 9026809000
• Production Capacity: 50, 000 Pieces/Year

Product Description

Product Parameters

Fluke T6-1000 - Electrical Tester with Fieldsense

 

• Test Leads Not Required - FieldSense technology allows for AC voltage, current and frequency measurements without making electrical contact to live voltage
• Simultaneous voltage and current display - shows all power supply measurements at a glance for efficient troubleshooting
• 1 to 1000V AC or DC
• 0.1 to 200A AC vs only 100 amps AC on the T5-600 / T5-1000
• Resistance measurement: 1 Ω to 100 kΩ

The Fluke T6-1000 is the first-ever instrument of its kind. Thanks to Fluke's unique FieldSense technology, the T6 is capable of measuring voltage up to 1000V AC using only the meter's open fork. This means you don't need to open any covers or remove wire nuts to take voltage readings on AC sources. The meter's open fork jaw measures 17.8mm and is large enough to fit wires up to AWG 4/0. Plus, the T6-1000 can also measure current up to 200A AC through its open fork while simultaneously showing voltage and current readings on its backlit screen.
 

Important Specs

 

Thanks to FieldSense, you can use the T6-1000 to measure multiple electrical parameters through the meter's open jaw alone. FieldSense supports measurement of AC voltage up to 1000V, AC current up to 200A, and frequency from 45Hz - 66Hz (FieldSense frequency is only available on the T6-1000 model). You can measure all these parameters without test leads using only the meter's open jaw. That said, the T6-1000 does come with built-in test leads which allow you to measure AC and DC voltage up to 1000V, and resistance in multiple ranges including 2000Ω, 20.00kΩ and 100.0 kΩ.

It is important to note that in order to get the most from FieldSense Technology, the T6 meter must have a capacitive path to ground. In most applications, this is provided by the user via a ground contact on the rear of the meter. However, in some cases a ground connection must be made using one of the built-in test leads. FieldSense can only measure voltage relative to ground and must have a solid ground connection. Phase to phase measurement is not possible with FieldSense.
 

Measure Voltage Without Test Leads

Contacting electrical conductors with test leads or alligator clips requires metal-to-metal contact, which as any electrician or technician knows, carries the potential for arc flash. FieldSense eliminates that step. The person performing the test is safer from potential electrical shock because the measurement tool and the voltage source under test are isolated. This is performed by means of galvanic isolation or separation, the principle that isolates functions of an electrical current to prevent current flow.

 

 

Stay Safe, Save Time

Unlike current sensing technologies which detect a magnetic field to derive current measurements, FieldSense technology actually detects an electrical field. This new method involves transducing and calculating a known signal to derive measurements for the source voltage. The meter itself generates a reference signal of known amplitude and frequency. When grounded, the resulting composite waveform is detected by an electronic sensor built into the tester. After amplification, processing and digital calculations, voltage and frequency measurements are derived.
 

How to Measure AC Voltage & Current with FieldSense

4 Simple Steps

Once you have your T6 in hand, ditching your test leads and taking measurements with FieldSense is relatively simple. The most important thing for getting accurate readings with FieldSense is making sure you have a solid ground connection.


 

1. Turn the meter's dial knob to the second position, or "FieldSense" function. The tester measures and simultaneously displays both AC voltage and AC amps on the T6-1000.
2. Make sure you create a solid ground connection for the meter. In most cases you can do this with your finger touching the ground contact on the back of the meter. However, if you are using insulated gloves, standing on an insulated ladder or otherwise insulated from ground, you must place the meter's black test lead on a ground conductor or attach it to ground with an alligator clip.
3. Once you are grounded, slide the meter's open jaw over the conductor under test to see voltage and current levels.
4. You will then see your reading on-screen - make sure to note the units of measurement. You can also press the HOLD button to momentarily freeze the reading for a quick snapshot of the screen readout.

Regardless of the T6's improvements to safety in taking electrical measurements, workers should still wear appropriate personal protective equipment (PPE). This means electricians should still wear arc-rated clothing and protective equipment including gloves, safety glasses or goggles, hearing protection and leather footwear. In lower voltage areas, measurements can be taken wearing minimal PPE, including gloves and protective eyewear. However, measuring without test leads does not mean you can skip wearing the required PPE.

In The Box

• Includes Attached test leads with removable 4 mm probe caps
• Includes User documentation

Manuals/Guides

Manuals

• Fluke T6-1000 Electrical Tester with Fieldsense Guide
• Fluke Field Sense Technology

Spec Sheets

• Fluke T6-1000 Electrical Tester with Fieldsense Data Sheet
• Fluke PRV240FS Proving Unit - Data Sheet

Application Notes

• Five ways Fluke FieldSense technology can help you work safer

Other

• Carrying Case Selection Guide

Manufacturer Specs

Calibration	1-year calibration cycle
Dimensions	61.1 mm x 259.3 mm x 43.8 mm
Fork opening	17. 8 m m
Temperature
Operating:	-10 °C to +50 °C (14 °F to 122 °F)
Storage:	-30 °C to +60 °C (-22 °F to +140 °F)
Altitude
Operating:	2,000 m (6,562 feet)
Storage:	10,000 m (32,808 feet)
Relative Humidity	0 % to 90 %, 5 °C to 30 °C (41 °F to 86 °F) 0 % to 75 %, 30°C to 40 °C (86 °F to 104 °F) 0 % to 45 %, 40°C to 50 °C (104 °F to 122 °F)
Battery Type and Life	2 x AA (IEC LR6); 360 hours continuous, typical; 200 hours using FieldSense
RF Field Specification	0.5 % full scale + (specified accuracy) at 3 V / m
Enclosure Rating	IP 52 per IEC/EN 60529, no vacuum applied
Temperature coefficient	0.1 x (specified accuracy) / °C for <18°C or >28 °C (< 64.4 °F or > 82.4 °F)
Safety	IEC/EN 61010-1, IEC/EN 61010-2-033: Pollution Degree 2
Electromagnetic Environment	IEC/EN 61326-1: Portable

Tech Specs

Clamp Meters/Clamp Meters Template
True RMS	No
Maximum Current AC	200 A
Maximum Voltage AC	1000 V
Maximum Voltage DC	1000 V
Maximum Conductor Size	0.5 IN
Resistance	Yes
Capacitance	No
Auto Ranging/Manual	Auto Ranging
In-Rush Current	No
Test Equipment General Attributes
Unique Features	•Fieldsense measure voltage to 600 VAC through open fork without test lead contact to live voltage •Automatically measures volts AC and volts DC with precise digital resolution •Displays resistance to 1000Ω •Easy and accurate OpenJaw™ current measurement •Continuity beeper •Compact design with neat probe storage •Rugged enough to withstand a 10-foot (3m) drop •Detachable SlimReach™ probe tips are customized for national electrical standards •Test leads accept Fluke accessory test clips •1000V model •Can stay connected much longer than solenoid type tester •Auto off mode to conserve battery life •Optional holster attaches to a belt and neatly stows test leads •AC current •Display hold
Warranty	2 YEARS
Safety Approval	CE, CSA, UL
Interfaces I/O	Analog Output, Other
IP Rating	IP52
Product Weight	0.8 LBS
Product Height	2.01 IN
Product Length	10.51 IN
Product Width	2.99 IN
Data Logging	No
HTS/Schedule B Number	9030.31.0000
ECCN Number	3A992
Calibration Included	None
Battery Type	AA
Power Supply Voltage	Battery Powered
Country of Origin	United States

Packaging & Shipping

 

As an important international instrument sales platform, our company has the authorization qualifications of many international first-line brands. Relying on the advanced digital information management platform and international procurement platform, we provide more than 100,000 instruments, industrial MRO products, industrial products and spare parts to global customers. Our business scope: industrial testing, non-destructive testing, gas testing, electrical testing, laboratory testing, water quality testing, environmental testing, medical testing...    

So far, we have become an important partner of many global top 500 companies and well-known local Chinese companies. Create an efficient supply chain system to provide customers with strong supply guarantee.